How Do You Diagnose USB-to-Serial Problems in Delphi? https://forum.nag.ru/index.php?/topic/212463-how-do-you-diagnose-usb-to-serial-problems-in-delphi/&do=findComment&comment=1790441 When a Delphi application cannot communicate reliably with a serial device through a USB adapter, what is your preferred way to separate hardware problems from application configuration? A useful starting point is to record the adapter model, driver version, device pinout, and required communication settings. Matching connectors alone do not establish compatibility, so the device documentation should determine the cable wiring and interface requirements. On the software side, I would explicitly configure baud rate, data bits, parity, stop bits, and flow control rather than rely on settings left by another application. With the Windows API, GetCommStateand SetCommStateprovide a way to inspect and apply the serial configuration. Testing the same device in a terminal program with matching settings could help narrow the investigation. Logging transmitted and received bytes, timeouts, and error codes would also make comparisons easier. Which checks have helped you distinguish adapter or wiring faults from Delphi code issues, particularly when communication works initially but fails after disconnecting and reconnecting the adapter?

Дырки в ASUS https://forum.nag.ru/index.php?/topic/212456-dyrki-v-asus/&do=findComment&comment=1790376 Unauthenticated RCE affecting 35 million ASUS routers | MrBruh's Epic Blog Ботнетик ожидается знатный

Установка snmp карты в snr-ups-onrt 10000INT https://forum.nag.ru/index.php?/topic/212452-ustanovka-snmp-karty-v-snr-ups-onrt-10000int/&do=findComment&comment=1790306 Всем доброго дня! Приобрел dz807 модуль, но не нашел инструкцию по установке в snr-ups-onrt 10000INT. Знающие, подскажите пожалуйста как грамотно это сделать.